MG-IP series, TDM over IP Media Gateway

Specification:
Interfaces LAN: Two 10/100BaseT, RJ-45, Full/Half Duplex
Auto-negotiation or Configurable Speed and Duplex (802.3)
Support for Bandwidth Control (1Kbps Increments)

E1: One or Four E1/FE1, T1/FT1 ports, RJ-45 120 Ohm Balanced, 75 Ohm Unb.
Framing: CRC4, CAS, Unframed, D4 (SF), ESF
Line Coding: HDB3, AMI or B8ZS
E1 Standards: ITU-T Rec. G.703, G.704, G.706, G.732, G.823
T1 Standards: AT&T TR-6241; ITU-T Rec. G.703, G.704
ANSI T1.403, G.824
E1 Receive Level: 0 to -43dB; 0 to -12 dB
T1 Receive Level: 0 to -36dB; 0 to -15 dB
Protocols LAN: IP, TCP, UDP, ICMP, MAC
Qos: Type of Service (TOS) CLI configurable, QoS per Vlan ID
E1: Over IP TDM Over IP a€” Circuit Emulation Services Over IP and Over Ethernet
IETF SAToP/CESoPSN; MEF-8/CESoETH
Packet Size: Configurable in 1 frame increments
Jitter: 1-200 msec, configurable
Latency: Built-in G.823/G.824 compliant synchronization
Clocking: Loopback, Internal, Recovery/Adaptive, External
Management Configuration: Telnet (configuration, monitoring & reset), Console (DB-9 Connector)
SNMP: MIB-I, MIB-II (RFC1213), DS1 (RFC2495) with configurable traps
Diagnostics: Local Loop, Remote Loop, BERT Test, Ping
Upgrade: Nondestructive firmware upgrade via TFTP
Dimensions 165mm x 197mm x 38mm (LxWxH)
Environmental Temperature:
Operating 00C to +500C / 32-1120F
Storage -200C to +600C

Humidity 0% - 95%, non condensing
Power 5VDC, 1.5A Ext. Power Supply
Safety Standards UL, CSA, FCC Part 15 Class A, CE
Applications:
  • Cellular E1/T1 backhaul
  • Broadband wireless voice/data access
  • Branch and campus PBX/LAN connectivity
  • Voice and data services over cable networks and xDSL
  • Application diagram