Active Equipment

 

FM-4, Optical Multiplexer

Specification:

Line interface (optical) Wavelength: 1310/1550 nm
Maximum output: -15 dBm
Minimum sensitivity: -32 dBm
Connector: SC (specify on order)
Fibre type: single mode
E1 interface Line Rate: 2.048 Mbps
Input Signal ITU: G.703
Output Signal ITU: G.703
Connector: DB-9 (specify on order)
Electrical: 120 ohm twisted pair/75 ohm coax
Ethernet interface Data rate: 100 Mbps
Standard: IEEE 802.3u (100Base-TX)
Auto-negotiation: half/full duplex, 10/100 Mbps
Connector: RJ-45
Control and diagnostic LEDs: power, optical link (for each fibre), E1 link (for each E1), test (for each E1), 100Base-TX link, duplex mode, 100 Mbps mode
Diagnostic tests: local loopback, remote loopback
SNMP management: Olencom View (HP Open View compatible)
Physical/Electrical Stand-alone model:
  • Dimensions: 268 x 43 x 180 mm (WxHxD)
  • Wight: 1.2 kg
  • AC power supply: 100-240Vac, 50-60 Hz, 25 watts
  • DC power supply: 36-72 Vdc, 5 watts
  • Mounting: Desk-top stackable
Plug-in card:
  • Dimensions: 29.5 x 2.7 x 17 cm, 12" x1 " x 7" (WxHxD)
  • Power: 24-48 Vdc, 5 watts per card
  • Mounting: Plugs into FM-S each rack cage can have 14 plug-in units, plus SNMP card
Temperature 0oC - 50oC
Humidity 0-95%, non-condensing
Applications: